|
Featured Accessory |
Bottom Feeder V2 formerly Mudcat
|
Introducing the all-new Bottom Feeder V2 vehicle undercarriage cleaner. Ideal for cleaning the underside of buses, tractor trailers,
construction equipment or under any other vehicle where normal pressure washing is impossible. Extended exposure to road salt is the
#1 cause of premature body corrosion. This unit is perfect for regular removal of road salt which accumulates on a daily basis during
the winter season. This system can remain in service throughout the year as well. Mud and other road related grime will continue to
build up under your vehicle over time perpetuating the underbody corrosion of your equipment year round. The Bottom Feeder V2 will
decrease the time needed to maintain your vehicle fleet while increasing the lifespan of your investment.
4 Rotating Cleaning Nozzles
Operating Pressure up to 4000 PSI
Temperatures up to 250° F
Will operate in clearances as small as 5 1/2 inches
Price: $699.00
| |
|
Surface Cleaning |
|
Water Jet Surface Cleaner
Part No. 30-585
Attaches to any hot or cold pressure washer
Use @ 2000 to 4000 psi, up to 200 dgr F
Cleaning width: 20"
Shell made of durable polyethylene
Weighs only 45 pounds
Pneumatic tires for easy maneuvering
Holster mounted wand for spotcleaning
Variable height adjustment
Inline filter to keep nozzles clear
Price: $1,275.00
|
Cyclone Surface Cleaner
Part No. 30-587
Attach to any hot or cold pressure washer
Use @ 2000 to 3500 psi, up to 200 dgr F
Cleaning width: 20"
Shell made of durable polyethelyne
Weighs only 40 pounds
Pnuematic tires for easy maneuvering
Spray bar spins at 2000 rpm
Inline filter to keep spray nozzles clear
Price: $795.00
|
|
Mosmatic Hover Surface Cleaner
Part No. 80.770
21" Two Nozzle Rotor Arm
Maximum 4000 psi 250 dgr F
Stainless Steel
Best used with minimum 4 gpm @ 2000 psi
$699.00 Reg. $999.00
On Current Stock Only. Limited Supply
|
|
Wet Sandblaster with Probe
Part No. 4-011211
Tungsten carbide nozzle for long life
Best used at minimum of 3.5gpm @ 2000 psi
Quick coupled for easy attachment to pressure washer
Venturi system mixes high pressure spray with blast media to strip paint, graffiti, etc.
Valve on side handle controls media flow
Industrial duty rated
Price: $599.00
|
Wet Sandblaster with Pot
Part No. 4-011201
Tungsten carbide nozzle for long life
Best at minimum 3.5 gpm @ 2000 psi
Tubed, pnuematic tires for easy maneuvering
Pot holds approximately 400 pounds
Valve in handle controls media flow
Venturi system mixes high pressure spray with blast media to strip paint, graffiti, etc.
Industrial duty rated
Price: $995.00
|
Hose Reels |
|
Hose Reel, Non-Pivot
Part No. PW4416-PW1
Capacity, 200' of 3/8" hose
5000 psi, 325 dgr F rated
Manufactured by Rapid Reel
2-year no leak warranty
Many mounting brackets available
Landa part# 4-02751026
Price: $190.00
|
Hose Reel, 360 degree Pivot
Part No. PW5516-PW1
Capacity, 200' of 3/8" hose
5000 psi, 325 dgr F rated
Manufactured by Rapid Reel
2-year no leak warranty
Many mounting brackets available
Landa part# 4-02752030
Price: $315.00
|
Other Accessories |
|
Drain Cleaning Kit
Part No. 4-01923
Foot valve, 25' hose, 4.5 sewer nozzle
Attach pressure washer to clean drains and pipes
Covered, foot control pedal allows for hands free operation
3/8" FPT inlet
Longer hose lengths available, see hose section
Price: $159.90
|
Foot Valve for Drain Cleaner
Part No. SM344200
Covered, foot control pedal allows for hands free operation
3/8" FPT inlet
Attach hose from pressure washer to inlet
Connect drain cleaning hose to outlet
For use in cleaning drains and pipes
5000 psi foot valve available
Price: $97.72
|
|
Pit Cleaner Assembly
Part No. 30-575
Extended wand attaches to pressure washer
Water pressure is channeled so it creates a vacuum
Sludge is deposited into cart mounted porous collection bag
Water drains from the bag so the sludge can dry, after drying, the sludge can be disposed of properly
Individual supplies available
Sludge cart pictured sold separately
Price: $515.00
|
Telescopic Super Wand
Part No. B6178
Wand extends 6' to 18'
3/8" hose for less resistance - 4000 psi rated
Triggergun "attacher" protects pole from damage
Spray end "attacher" unclamps from pole if hose needs replacing
Also available 6-12' wand (order # B6455)
Also available 8'-24' wand (order #B6457)
Price: $180.00
|
|